How to Isolate Workgroups Using an IP Mask

<P>Decide on the number of hosts that you need within each workgroup. It is best if the workgroups are approximately the same size.</P><br /><P>Determine the IP Class type of your IP address range. If the first octet of the network IP address range is between 1 and 126, then the IP Class type is Class A. If the first octet of the network IP address range is between 128 and 191, then the IP Class type is Class B. If the first octet of the network IP address range is between 192 and 223, then the IP Class type is Class C.</P><br /><P>Look at the chart in the Pantz <a href="">Internet</A> Protocol (IPv4) Subnet Chart (see Resources) that corresponds to the IP Class type of your IP address range. Find the number in the "Number of Hosts" column that is slightly greater than the workgroup size determined in Step 1. If the number listed in "Number of Subnets" in the same row is equal to or greater than the number of workgroups you need, then note the subnet mask listed in the "Subnet Mask" column. If not, find the number in the "Number of Subnets" column that is equal to or greater than the number of workgroups needed, and note the subnet mask listed in the same row.</P><br /><P>Determine the IP addresses per workgroup using a subnet calculator (see Resources). In the subnet calculator, select the IP Class type of your IP address range. Then enter the IP address octets into the "IP Address" fields that have a "255" in the corresponding subnet mask and type "0" for the remaining octets. Then type or select the subnet mask determined earlier and press the "Enter" key.</P><br /><P>Note the "Host Address Range" displayed in the calculator, as that is the host address range of the first workgroup. Increment the last octet of the last IP address displayed in the host address range by 2 and enter the result in the "IP Address" fields and press the "Enter" key. Note the "Host Address Range" displayed, which is the host address range of the second workgroup. Repeat to find the IP address ranges for all workgroups.</P><br /><P>Assign each workgroup host an IP address that is within the IP address range for the workgroup to which the host belongs. Assign each workgroup to one VLAN within the network infrastructure.</P><a href="http://www.ehow.com/how_7724948_isolate-workgroups-using-ip-mask.html">Source.</A>

How to Isolate Workgroups Using an IP Mask

Decide on the number of hosts that you need within each workgroup. It is best if the workgroups are approximately the same size. Determine t...

Continue Reading>>

Problems With XP & IE6 When the Internet Drops Out Using Dial Up

<P><a href="" title="#jsArticleStepImageCredit1 rel=thinbox></A> A dial-up connection is slower than a broadband connection.A dial-up connection is a type of <A">Internet</A> connection available from Internet Service Providers. It is the most inexpensive; however, it is also the slowest of all types of Internet connection. It provides Internet connections through a local server with a standard 56K modem. Literally, the <a href="">computer</A> dials the ISP-provided phone number and once it succeeds, it connects through the server to <a href="">the Internet</A>, allowing the user to use all Internet programs.</P><br /><P>When the dial -p connection drops out, Internet Explorer 6 and Windows XP will encounter problems. One of the most common XP problems encountered is when the Internet drops out using a dial-up connection is the appearance of a dialog box that says "Internet connection has been reset." This usually occurs when the user is downloading a file.</P><br /><P>When the connection is back online, the file transfer window will remain open, but in the download folder or download location, the file is marked with a red "X." This problem can be solved by deleting the file that has been downloaded and trying to download the file again.</P><br /><P>When the Internet drops out using a dial-up connection, IE6 stops responding. Holding the "Ctrl," "Alt" and "Del" keys to open the Task Manager and remove IE6 from the list of running programs may help. Unfortunately, to resolve this problem, a complete computer reboot is necessary.</P><br /><P>The dial-up connection is very cheap compared to other types of connection; however, it is also slower. Unfortunately, the slow connection is also possible because of the Internet drop off problems. A dial-up connection transfers data via an analog phone line. This transfer type will affect the total connection speed and increase the risk of an Internet connection dropout. This intermittent connection will affect XP and IE6 programs. </P>

Problems With XP & IE6 When the Internet Drops Out Using Dial Up

 A dial-up connection is slower than a broadband connection.A dial-up connection is a type of Internet connection available from Internet S...

Continue Reading>>

The Advantages of Using Windows Vista

<P>Windows Vista is the new operating system from Microsoft. It offers new and improved features. It also offers some of the same features that we are all used to. Windows Vista came out earlier this year and offers a new visual interface. This new Windows Vista visual interface is called Windows Aero. There are also new tools included within Windows Vista like a new DVD Maker that many users like. Microsoft is also trying to link Windows Vista with their other home console - the XBOX 360. Of course, with each new operating system comes some criticism.</P><br /><P>· One of the best and newest advantages of Windows Vista is its new security features. Windows Vista provides great security features that help to prevent people from hacking into your system. If you try to do certain sensitive actions, it will ask you for a password. This will help to prevent people from entering your system without permission.</P><br /><P>· The new version of Internet Explorer in Windows Vista has also upgraded its security features. It has new filters and parental controls to keep you safe while you are surfing online. Windows Vista also sports a new robust anti-spam guard. This is called Windows Defender, and it will help keep you safe from spyware and adware that can slow down your system.</P><br /><P>· Windows Vista's security features aren't the only new advantages to the operating system. There is also a new, more visual, user interface with Windows Vista. Microsoft has called this Windows AERO. The AERO stands for authentic, energetic, reflective, and open. It is a new 3D interface making it easier to use. All the new graphics in Windows Vista will really take advantage of the new technology they have added to the operating system.</P><br /><P>· Windows Vista makes it easy to set up small business offices to large mega corporations. It does this using its new imaging technology. Using this new Windows Vista technology, it has become more cost effective to switch an entire office over to the new operating system.</P><br /><P>· Microsoft has also made it easier to use applications on Windows Vista. With its improved peer-to-peer sharing, as well as .NET framework, it has become easier to use a variety of applications.</P><br /><P>· Windows Vista provides new levels of stability as well. Its new driver system makes access and using most program drivers more stable. They have designed a sort of two-tier system which can help prevent crashes. The new Windows Vista system also will detect driver problems as soon as they occur, and the program will restart it automatically without having to reboot the entire system.</P><br /><P>· Another great new feature to Windows Vista is a feature called sleep. It takes the best qualities of hibernate and standby and combines them into one. With sleep, in Windows Vista, you can quickly and easily temporarily stop your computer without having to shut the whole thing down. This is also a great energy saving tool embedded in Windows Vista as well.</P><br /><P>· A new program called SuperFetch allows for Windows Vista to access and load programs faster. No more wait times. SuperFetch with Windows Vista uses a new intelligent proprietary system based around the programs you use often. It pre-loads these files or programs into its memory so it can launch them faster. This eliminates the slow response after rebooting your computer with Windows Vista.</P><br /><P>· In the past, if your computer started to run slowly, it was usually an issue with your RAM (random access memory). After that, you would have to remove the RAM and add more to fix the problem. This can void warranties, or it can just become a hassle, especially if you don't know what you are doing. With Windows Vista, you can now plug in a USB drive or flash drive, and Windows Vista will use that to help boost its performance. No more rebooting, or having to buy new RAM chips with this OS.</P><br /><P>There are many new advantages to Windows Vista. They have put a lot of effort into making an operating system that everyone will enjoy, and that is easy to use. They have added new security features to Windows Vista to keep you safe while you are on the net and off. There is a new visual interface to make it easier to use, and Microsoft has really addressed some of the issues of the previous operating systems with Windows Vista. Although nothing is perfect, Windows Vista seems to have all of the answers for now.</P>

The Advantages of Using Windows Vista

Windows Vista is the new operating system from Microsoft. It offers new and improved features. It also offers some of the same features that...

Continue Reading>>

Computers and Technology: The Danger of Using Social Media

<P>Do you think you would ever walk into a bar, stand on a table and start shouting out all the details of your life?</P><br /><P>What about walking up to a complete stranger in the mall and asking if that person would like to be your friend or build a relationship with you?</P><br /><P>Well, those who use the internet and social media often do things online that they would never do face-to-face or in public.</P><br /><P>The problem is that when you post things that you think are only for the eyes of friends or family, you forget that there are thousands of other people who can also view them. Some might be innocent bystanders whereas others might not have noble intentions. And don't try to tell me that you have an antivirus program to protect you. If there are people smart enough to hack into the Pentagon's computer, there are people who can get around your program.</P><br /><P>This week, researchers have warned that no matter how secure your site is, those who play FarmVille can easily become victims of identity theft. The terms of agreement that you likely didn't read when you made a Facebook account state that all information and photos you post become the property of Facebook. That means that you might see your photo plastered on an advertisement for Viagra or in another place that you would not otherwise approve in the future.</P><br /><P>Teenagers who grew up with the internet tend to use it as their major form of communication but they don't seem to have gotten the message that what you put on the internet stays there forever - even if you think you have erased it. Imagine how embarrassed one might be in the years to come if or when others access information you wrote as a youth just when you are applying for an important job, running for a political office or trying to be an example for others to follow.</P><br /><P>And the problems are not just occurring because of the actions of children and teenagers. Adults who think it is cute to post pictures of their children or grandchildren risk having them be seen by perpetrators - and some of them might not just be interested in looking. When you add personal information, it sets the child up for a kidnapping - or worse.</P><br /><P>I have heard people state that they are not worried about identity fraud because they don't have any money anyway. Well, consider this. Have you ever lost your wallet? Think of all the problems you had in trying to replace ID and notify credit card companies about the loss. Now add to this the fact that someone is out there ruining your reputation as they try to impersonate you in any number of ways.</P><br /><P>Someone told my daughter that you should never post anything you wouldn't want your mother to see. Well, that doesn't even take it far enough. You can trust your mother - but you can't trust everyone else who has access to a computer.</P><br /><P>It's time to stop playing innocent or pretending that it won't happen to you. When you put information on the internet, you risk your financial security, your reputation and may even set up the ones you love the most for serious harm.</P>

Computers and Technology: The Danger of Using Social Media

Do you think you would ever walk into a bar, stand on a table and start shouting out all the details of your life? What about walking up to ...

Continue Reading>>

How to Run a FileMaker Script Using Visual Basic

<P>Launch Visual Basic.</P><P>Click "Project" along the top of Visual Basic and choose "References" and "Add Type Library."</P><P>Click the checkbox near "FileMaker Pro Type Library" and choose "OK."</P><P>Call the FileMaker script with this code, according to the FileMaker official website:</P><P>"Dim FMProApp as FMPro70Lib.Application</P><P>CreateObject("FMPRO.application")</P><P>Dim FMProDocs, FMProDocs.Open("c:\MyFile.fp7","","")</P><P>Dim FMProDoc</P><P>FMProDoc.DoFMScript("MyScript")</P><P>Set FMProDoc=nothing"</P><P>Type this without the quotes at the front or back. Change the "MyFile" part to where your script is saved, and change "MyScript" to the name of the script. This will connect and run the FileMaker script.</P>

How to Run a FileMaker Script Using Visual Basic

Launch Visual Basic. Click "Project" along the top of Visual Basic and choose "References" and "Add Type Library....

Continue Reading>>

A Potential of 20 Million Hackers Each Using Technology Worth Barely 500 Dollars Considered

<P>Thankfully, the United States government and the United States military is finally getting serious about Cyberwarfare, and the potential of serious threats to our economic infrastructure due to hackers, and foreign militaries attacking our systems. Yes, it is a real threat, one we have to deal with, and it doesn't help that our government continually awards contracts to software providers for patchwork.</P><br /><P>There are too many people in the know, who understand the code behind all these programs, and far too many coded programs working together in conjunction to make the entire system work, or in many cases not work at all. And the question is how do you fight a bunch of hackers who have very little money invested, and are maybe doing their hacking from a cybercafe somewhere in China?</P><br /><P>If you think proxy terrorism is bad, consider a nation-state which is covertly funding groups of hackers in Eastern Europe, or patriotic hackers in China. It gets pretty serious pretty quick, and unfortunately our systems are vulnerable, and they have been attacked incessantly.</P><br /><P>In a recent Lexington "Think Tank" Institute article by Loren Thompson PhD entitled; "What Force Multiplier? US Military Losing Cost-Exchange Advantage in Combat" which was published in October of 2010 brought up a very good point. Dr. Thompson in this paper stated;</P><br /><P>"The U.S. is spending a billion dollars per month to protect its military and intelligence networks against penetration by overseas spies and hackers. The amount of money our enemies are putting into circumventing these protections is probably a very small fraction of that amount, and the cost of developing kinetic or non-kinetic means for disabling U.S. networks is quite modest."</P><br /><P>The cyber threat is real, and we've already been jeopardized by hackers, and our allies have been subject to cyber attacks from foreign militaries. Of course, there is also an offensive capability to this, in that we noted that Iran was attacked by someone, no one knows who, and everyone has denied the attack - nevertheless, it prevented their nuclear power plant from starting up. And this thought is rather scary, because all of our infrastructure in the US, as most of it runs on some sort of computer system.</P><br /><P>We had better get our systems ready to combat cyber attacks, and hackers from destroying our world as we know it. Please consider all this, because if we don't do something, we are all in trouble.</P>

A Potential of 20 Million Hackers Each Using Technology Worth Barely 500 Dollars Considered

Thankfully, the United States government and the United States military is finally getting serious about Cyberwarfare, and the potential of ...

Continue Reading>>

Using Computer Forensics in the Real World

<br /> <p>It seems that since time began we have been dealing with people trying to steal from their neighbors. Today's thieves are not only stealing tangible items but personal and technological information from computers that can cost businesses and people in the private sector millions of dollars. A new career opportunity has developed in the area of computer forensics that is teaching people how to protect computers from being accessed illegally and how to find who may have accessed a computer without permission.</p><p>The department of computer crimes is now looking for experts in the area of computer forensics training. Many police departments have begun sending their detectives, who have an interest, to college specifically to earn a degree in this area. These students will be required to take courses in computer hacking, finding hidden data on hard drives and more. The training will also provide information on how businesses can prevent their computers from this type of crime.</p><p>Computer forensics training will supply you with all the techniques and knowledge needed for this particular job. This will also include data recovery for lost, deleted of encrypted files and deciphering what criminal acts have been committed for trial purposes.</p><p>No matter how careful a thief may be they always leave behind some kind of evidence that can only be discovered with computer forensics. At training classes you will be given access to and learn the latest technology, tools and programs to enable you to do this type of detective work. This is the only way to effectively prosecute a computer thief.</p><p>Most forensic classes offered at colleges are the same although there may be a few subtle differences from one school to the next. These classes will take some time and effort to complete but in the end you will have a certificate that will get you employed with a high paying company in almost any part of the world.</p><p>After graduation you will have the knowledge necessary to combat computer fraud, hacking and other crimes in these technological times.</p> <br /> <br /> <br /> <br /> <br /> <br /><br /> <p><a href="http://www.squidoo.com/pccomputerforensicstraining" target="_new"> Computer forensics training</a> offers valuable career opportunities and is commonly offered at most colleges, universities and other educational institutions. Get more information on computer forensics. Visit computer forensics training now <a href="http://computerforensicstraining.net" target="_new">http://computerforensicstraining.net</a> to learn more.</p> <br />

Using Computer Forensics in the Real World

It seems that since time began we have been dealing with people trying to steal from their neighbors. Today's thieves are not only st...

Continue Reading>>

Potential Problems of Not Using Desktop Security Software

You perhaps feel a bit like you are the safest person in the world. You ensure that your children are always buckled up in the automobile. You most likely have an alarm detector on both your automobile and home. But have you got desktop security software? What's desktop security software, you ask? It's software of all sorts. In this post, you'll find out more about the signification of desktop security software and how it works.<br /> Desktop security can be having anti-virus software on your computer. If you travel the Internet, you are going to need anti-virus software. It prevents hackers, spammers, and other unsecure programs from entering your computer. You will need to find the best anti-virus software for your computer. You will be required to update your anti-virus software every so often. Also, make sure to scan your computer. Some anti-virus software will periodically scan your computer. But it is really up to you to fully scan your computer for viruses. Even with anti-virus software, some viruses may be sitting on your computer without you knowing it.<br /> The next piece of desktop security software you need is spamware. Spamware prevents from hacking and attacks entering your computer. If you shop online a lot, you may be leaving your tracks behind. These tracks are called "cookies". Shopping sites will leave these cookies so they can keep information on you. This information is for other marketers to contact you. A lot of people feel that this is an invasion of privacy. And this is why spamware was created. This will prevent all attacks from entering your computer. Plus, no cookies will be left behind. You may even want to set up spam controls on your email. This will help you from getting unwanted emails.<br /> Now you can feel completely secure with all of your desktop security software installed onto your personal computer. It's better to find than you believe. If you were not aware about of any these software, then it's definitely time for you to go looking for it. Now that you are given the tips, you can run with them.<br /> Some other desktop security would be to have a password to enter your Personal computer. If you are employed on your PC, then you want to have as much limited access as practicable. You'll even need to line up a firewall. You'll either use the Windows firewall or the one supplied by your anti virus software. You don't need both, either one is fine. All firewalls are made in a similar way.<br /> Another aspect of desktop security that you will need is a drive backup. Data is always at risk of becoming corrupted by accident. Backups can be made on a USB or on the Internet. You will need to decide on what's best for you.<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> For more information related to the topic, please click here: <a href="http://www.cornelianetwork.com/" target="_new">desktop security software</a>.<br /> <br /> <span class="status action"><b>EDFGZFKX2WHX</b></span>

Potential Problems of Not Using Desktop Security Software

You perhaps feel a bit like you are the safest person in the world. You ensure that your children are always buckled up in the automobile. Y...

Continue Reading>>

Advantages of Using Business Broadband

<br /> <p>There are many advantages of using business broadband. Due to the growth in technology, many lives have been transformed. Businesses rely heavily on fast internet so as to perform daily activities. Usually internet requirements of individual users differ from that of a business.</p><p>An individual or home user can use 2 Mb bandwidth. This will be enough for speedy browsing, on line games, heavy downloads, high speed video streaming or even chatting. The home user will not have a lot of problems in case of disconnection or poor services caused by heavy loads or other reasons.</p><p>In any particular the advantages of using business broadband is that many machines are running and so many communications happen at any one time which means an 8Mb bandwidth may not be enough. The business cannot afford to have a disconnection for any reason as it will lead to big losses incase of a shut down. High bandwidths are also required to connect servers and different offices in order to arrange for video conferences or meetings which are held online. This has increased the advantages of business broadband.</p><p>Broadband has different and better functions as compared to normal broadband. It has higher speeds, better customer support, good security and can handle heavy download among other range of services that are up to date with the current business environment.</p><p>Another one of the advantages of using business broadband is that better customer support is synonymous with broadband for business. Customer support from the providers is very crucial because they are able resolve a problem which would arise in the course of the business within an agreed period. Usually the business signs an SLA (service level agreement) with the provider. This agreement shows the duration within which any problem should be resolved.</p><p>The issue of security is very important in any business, which makes the broadband business advantageous. Business broadband ensures that the network is very secure and cannot be easily attacked or damaged by viruses or even hacked by burglars who want company information. It also has VPN facilities which allow users to login into their system securely.</p><p>Broadband allows unlimited downloads and cannot allow degraded speed. The speed of internet connection is very vital in any business. Business broadband takes care of all the needs of a business.</p> <br /> <br /> <br /> <br /> <br /> <br /><br /> <p>Hire a professional and affordable <a href="http://webdesignerhire.com/" target="_new">web designer for hire</a> to give your website a competitive advantage.</p><p>Call, instant message, email, or text message our <a href="http://webdesignerhire.com/" target="_new">web designer for hire</a> today!</p> <br />

Advantages of Using Business Broadband

There are many advantages of using business broadband. Due to the growth in technology, many lives have been transformed. Businesses rely...

Continue Reading>>

Top 6 Tips on Using Bluetooth Enabled Printers

<br /> <p>Wireless connectivity just got a whole new meaning with the advent of Bluetooth technology. It enables you to achieve hassle-free mobility and so doesn't restrict you geographically. Best of all, you don't need to worry about printing issues - no matter where you are.</p><p>Tips on printing using Bluetooth</p><p>Using a Bluetooth adapter can convert any printer into a Bluetooth enabled one. However while using any Bluetooth enabled printers, it is important to know a few basics. In this section we elaborate on these.</p><p>1. Limited range: With Bluetooth enabled printers, you'll find that range is an issue. The range of distance within which printing is possible is from about 30 to 330 feet. This of course would depend on the hardware configuration. The higher the range the more the power needed, which could drain out your battery in the long run.</p><p>2. Printing from the mobile: There are times when you just have to print that gorgeous picture or that document from your hand-held PDA to a Bluetooth enabled printer. In such cases, what you need to do is: search for your Bluetooth enabled printer on your mobile phone. You might find it in the option called BT (Bluetooth) Discovery. On clicking this, it will show all the available Bluetooth devices. Then you can select the printer and hit on "Print". However be careful, as the Discovery stage makes your phone or handheld device accessible to anyone and everyone within your vicinity. Therefore it can be susceptible to hacking. Be sure to switch off the Bluetooth mode once you're done printing.</p><p>3. USB ports: Some printers have what is called the Pictbridge USB port which is compatible with any Bluetooth adapter. This makes printing from any Bluetooth device easier. Pictbridge is a hardware interface technology that enables your printer to access and print images and files from your mobile or PDA. To perform Pictbridge printing you need to:</p><p>a. Connect the USB device</p><p>b. Wait till both the devices recognize each other</p><p>c. Select from the menu that appears, the set of images or files you want printed</p><p>d. The menu also offers options to change the size, layout and resolution of the images</p><p>e. Select 'Print'</p><p>4. Hacking: Make sure you avoid setting your Bluetooth enabled device to a 'discoverable mode'. This makes it possible for your IP address to be known by any person with malicious intent. Often such attacks are directed at mobile phones, PDAs and computers. Hackers usually connect to your PDA or mobile by using fictitious names that are familiar to you. Therefore if you connect even once to their device, chances are, the hackers can keep connecting to your device and use it for malicious purposes - like sending a virus, crashing your operating system or even deleting important files.</p><p>5. Enable encryption: For security reasons, it's best to always enable encryption for any Bluetooth transfer that you may make. In order to enable encryption in any Bluetooth enabled device, you need to use the Bluetooth connection Wizard (usually present on Windows XP operating systems).</p><p>6. Keep firmware updated: It is also essential to ensure speed and agility in your mobile phone while printing through your wireless printers. To do this, ensure your mobile phone's firmware is always kept updated.</p> <br /> <br /> <br /> <br /> <br /> <br /><br /> <p>This Article is written by James Kara Murat from PrintCountry.com, the contributor of PrintCountry Printer Ink Saving Tips. A longer version of this article is located at <a href="http://printerinkcartridges.printcountry.com/inkjet-printer-ink-cartridge-use-tips/top-6-tips-on-using-bluetooth-enabled-printers/" target="_new">Top 6 Tips on Using Buletooth Enabled Printers</a>, and some related resources can be found at PrintCountry Articles such as History of Epson Printers.</p> <br />

Top 6 Tips on Using Bluetooth Enabled Printers

Wireless connectivity just got a whole new meaning with the advent of Bluetooth technology. It enables you to achieve hassle-free mobilit...

Continue Reading>>

Why You Need to Be Careful in Using Hot Spots

<br /> <p>People are getting more and more mobile. This is made possible with the various gears and devices that are being produced nowadays that allow any individual to connect to the internet even when they are on the go. Mobile laptops are Wi-Fi capable, cell phones have GPRS settings and other devices have built in features that allow its users to be connected wherever they are.</p><p>While this is a convenience that makes a lot of people ecstatic, people rarely realize that it also has its own downside. For one reason, connecting your device to hot spots can increase your risk of being a victim of identity theft. If you're doubtful about this statement, read the rest of the article.</p><p><b>Using your laptops in hot spots</b></p><p>Public Wi-Fi hot spots typically do not require passwords for its users to login, as they are public. It can often be found in different establishments like restaurants, hotels, coffee shops, and more. Some establishments require a minimal amount for usage, while others typically offer it totally free of charge. While internet users are happy about these free wi-fi services, internet hackers are ecstatic. In a recent hacker's convention, they (the hackers) illustrated over and over again how easy it was for them to hack wireless networks. When they did, they were able to view what other people (who are connected on the network) were doing.</p><p>How is this dangerous? Simple. When other people can see what you are doing, they will be able to view all the personal information that you are keying in on your keyboard and they can use this against you. They can sell it to identity theft criminals who will, either use the information to assume your identity, or sell it other people for more profit. They can also spread virus on the network and your computer system can be seriously at risk.</p><p><b>Using your cell phone on hot spots</b></p><p>Cell phones nowadays have multiple features which make cell phones a necessity. People do not just use cellular phones to make calls or send short messages. They can be also used as alarm clocks, organizer (reminders, to do lists, etc), entertainment (music player and games), multimedia device (camera, video camera, and voice recorder). Cell phones can also be used as your handy internet browser.</p><p>Cellphones have features that allow its users to connect online. There are cell phones that have wi-fi capabilities, like that of a laptop's. When you connect your cell phone to hot spots, they can be easily hacked and spywares can be installed on your cell phone without your knowledge. Identity theft can take place when criminals who were able to tap to your cell phone can listen to your conversations and record any personal information that you give out on the process of your conversation.</p><p>You cannot rely on the advanced features of your cell phone to keep yourself protected from identity theft. Most low-technology phones are actually more protected as they do not offer much features that can allow hackers to pass through their backdoors and commit identity theft.</p> <br /> <br /> <br /> <br /> <br /> <br /><br /> <p>Tina L. Douglas is a skilled writer from California. With numerous experiences in the field of writing for several financial institutions, she is greatly qualified across a variety of economic issues. Her notable pieces of writing involve <a href="http://personalcreditprotection.net/" rel="nofollow" target="_new">personal credit protection</a> and <a href="http://onlineidentityprotection.net/" rel="nofollow" target="_new">online identity protection</a>.</p> <br />

Why You Need to Be Careful in Using Hot Spots

People are getting more and more mobile. This is made possible with the various gears and devices that are being produced nowadays that a...

Continue Reading>>

Disadvantages of Using VoIP Phone Service For Business

<br /> <p>Though VoIP is growing at a fast pace and its adoption is increasing every day, some critical issues need to be worked out before it can replace Public Switched Telephone Networks (PSTN). The keyword is reliability. VoIP is cheap, easy to implement, customize and manage, but it is only as reliable as your internet network and the underlying electrical supply.</p><p><strong>VoIP - efficiency versus reliability</strong></p><p>Undoubtedly, VoIP is efficient. The phone systems can be tailored to meet users' needs perfectly. But do they guarantee 100% availability like your PSTN phone? No. That's because electricity and internet outages happen. Traditional phone systems sound old fashioned but they are simple and rarely go out of order (discounting natural catastrophes, of course).</p><p>If many organizations haven't taken to VoIP yet, their reluctance is justified. No business can afford loss of phone connectivity, even for a short while. Let's discuss some of the problems that VoIP developers must sort out to set the ball rolling.</p><p><strong>Total dependence on power lines</strong></p><p>The main problem with VoIP is that it works on the internet which is powered by electricity. Any outage in wall power will disrupt the business phone system too. So, even if a business invests in a VoIP system, it will need to maintain backup to cover itself against such instances. Or it will have to invest in an uninterrupted power source.</p><p><strong>Difficult integration with equipment</strong></p><p>VoIP as yet does not integrate with equipment such as digital video recorders, home security systems, etc. that work on the phone line. This deters home users from switching to VoIP as they would have to make a lot of unwanted changes.</p><p><strong>IP calling makes 911 call tracking difficult</strong></p><p>VoIP works with IP addresses not geographical addresses. This becomes a hindrance for 911 emergency calls as it is difficult to automatically know the geographical location of the caller, route calls to the proper call centers and nearest Emergency Medical Service (EMS). This problem could be solved if there was some way to add geographical location in VoIP transmissions.</p><p><strong>Internet connection may reduce call quality</strong></p><p>All the problems associated with digital transmission of information over the internet - jitter, loss of data packets, delayed transmission (latency) - are also relevant to VoIP. These factors affect the audio quality leading to voice breaking, delays, etc. - factors not conducive to a business environment.</p><p><strong>Security issues</strong></p><p>VoIP needs all the security measures that are required with a broadband connection to protect users from hacking, virus attacks, eavesdropping, etc. VoIP developers have come up with encryption schemes to counter this risk but a lot more needs to be done for businesses to trust VoIP systems completely.</p><p><strong>Impact of computers on VoIP quality</strong></p><p>VoIP phones come integrated with computer systems. If you are running a processor intensive application on your computer system, you will experience a sudden drop in audio quality during a call. This is called processor drain. If your system crashes, so does your VoIP system.</p><p>All these issues are problematic and VoIP engineers are trying to find solutions that can make VoIP more acceptable in business environments. Security and reliability are key factors that no business is ready to take a chance on. Advancing technology can make VoIP more reliable. If so, it could easily grow into a mainstream communication channel.</p> <br /> <br /> <br /> <br /> <br /> <br /><br /> <p>Daljeet Sidhu is at TradeSeam.com. Read <a href="http://www.tradeseam.com/smallbusiness/buying-guides/view-buying-guide/520/VOIP+Services" target="_new">VoIP service providers</a> advice and <a href="http://blog.tradeseam.com/Communications/VOIP-Services/voip-for-small-business" target="_new">VoIP services</a> blog.</p> <br />

Disadvantages of Using VoIP Phone Service For Business

Though VoIP is growing at a fast pace and its adoption is increasing every day, some critical issues need to be worked out before it can ...

Continue Reading>>

Understanding, Translating, and Using Those E-mail Headers

<br /> <p>Technology has made it possible for families to stay in touch with the simple click of a button, for best friends to exchange pictures of the new baby, and for people to make new friends or loves without ever leaving the security and confines of their home. E-mail is often the mode of interaction and with the popularity of the internet at an all time high, e-mail has quickly become a popular new mode of communication between people.</p><p>Unfortunately, this means that not only the communication you want is going to be sent to your inbox. In fact, laws have been put into place to keep you from receiving and being bombarded by unwanted and/or unsolicited e-mails. This is popularly referred to as SPAM. While the majority of SPAM is simply unwanted advertisements, on occasion, SPAM can contain malicious and/or harmful pieces of coding that can literally shut your computer down permanently.</p><p>If you are the recipient of SPAM, or simply want to know who is sending you messages, knowing how to decipher e-mail headers can be beneficial information. Understanding the e-mail process is the first step to recognizing, understanding, and interpreting e-mail headers.</p><p>Let's consider this example using two fictitious characters, Ralph using the e-mail address ralph<strong>AT</strong>tugood.com (we've substituted the <strong>@</strong> symbol throughout this article with the word <strong>AT</strong> so as not to have live email links to these fictitious addresses) and Suzy using the e-mail address suzy<strong>AT</strong>goodvibe.com. Ralph is using dial-up offered by Tu Good, Inc. and Suzy is using DSL offered by Good Vibe, Corp. Additionally, Ralph is using his new e-mail client to compose, send, and receive e-mail called Tu Good Connection while Suzy is using GoodVibe Connection for her e-mail client.</p><p>When Ralph wants to send a message to Suzy, he creates and sends the message; the message is first passed from his computer to Tu Good, Inc.'s mail server, mail.tugood.com. Then mail.tugood.com contacts Suzy's e-mail server called mail.goodvibe.com. The message from Ralph is now stored at mail.goodvibe.com waiting for Suzy to check her e-mail. Suzy then downloads the message onto her computer to read and/or store the message.</p><p>There is a lot of information you can get from the headers. With an average e-mail having a minimum of four stops, each stop adds its own bit of information. Let's watch to see what each computer adds to the e-mail header!</p><p><blockquote>Ralph sends an e-mail to Suzy. The message leaves Ralph's computer and lands at his mail server mail.tugood.com:</p><p></blockquote><br><blockquote><br><strong>From: ralph@</strong><strong>tugood.com (Ralph T. Good)</p><p>To: <a href="mailto:suzy@goodvibe.com">suzy@goodvibe.com</a></p><p>Date: Sun, Nov 18 2007 12:22:29 PST</p><p>X-Mailer: TuGood Connection v2.20</p><p>Subject: How are you today?</p><p></strong><br></blockquote><br /><br>Now, mail.tugood.com transmits the e-mail to mail.goodvibe.com:</p><p><strong>Received: from alpha.tugood.com (alpha.tugood.com [122.210.4.10]) by mail.tugood.com (9.1.1) id 809h7y; Sun, Nov 18 2007 12:22:34 -0800 (PST)</strong><strong>tugood.com (Ralph T. Good)</strong></p><p>From: ralphAT</p><p>To: suzyATgoodvibe.com</p><p>Date: Sun, Nov 18 2007 12:22:29 PST</p><p>Message-ID:</p><p>X-Mailer: TuGood Connection v2.20</p><p>Subject: How are you today?</p><p>Finally, the mail server for Good Vibe stores the message awaiting for Suzy to retrieve her message:</p><p><strong>Received: from mail.tugood.com (mail.tugood.edu [122.210.14.102]) by mail.goodvibe.com (9.1.1//8.3.2) with ESMTP id CAB9887 for ; Sun, Nov 18 2007 12:27:12 -0800 PST</strong></p><p>Received: from alpha.tugood.com (alpha.tugood.com [122.210.4.10]) by mail.tugood.com (9.1.1) id 809h7y; Sun, Nov 18 2007 12:22:34 -0800 (PST)</p><p>From: ralphATtugood.com (Ralph T. Good)</p><p>To: suzyATgoodvibe.com</p><p>Date: Sun, Nov 18 2007 12:22:29 PST</p><p>Message-ID:</p><p>X-Mailer: TuGood Connection v2.20</p><p>Subject: How are you today?</p><p><strong>What does all of this mean to you? </strong>Understanding what the e-mail headers says is the best way to interrupt who the message is from, when it was sent, and how to find those bothersome and irritating people sending you unsolicited messages and/or viruses. Let's investigate what all this means line-by-line.</p><p><strong>Received: from mail.tugood.com</strong></p><p>This e-mail message was sent from a computer or other machine with the name of mail.tugood.com ...</p><p><strong>(alpha.tugood.com [122.210.4.10])</strong></p><p>... and the name alpha.tugood.com is correctly identified. The IP address of the sender was 122.210.4.10.</p><p><strong>A quick note on IP addresses!</strong></p><p><blockquote><br>Internet Protocol (IP) address is something unique at that time to the sender. Electronic devices, such as a computer, use IP addresses to identify and actually communicate with one another on the network. The uniqueness of the number will be dictated by the internet service provider as well as the local networking setup. IP addresses can be one method of narrowing down where a message originates, and sometimes, an IP address can tell you the exact computer that sent the message.</p><p></blockquote><br /><br><strong>by mail.goodvibe.com (9.1.1//8.3.2) with ESMTP</strong></p><p>The receiving machine was mail.goodvibe.com using a mail receiving host running sendmail with a version of 9.1.1/8.3.2.</p><p><strong>id CAB9887 for suzyATgoodvibe.com</strong></p><p>This ID number is assigned by the receiving machine, and is unique to this particular message. The intended use of an ID number is for an administrator to look through the log files to retrieve information about the message. For instance, when the message was sent, and more information about the machine sending the message.</p><p>The <a href="mailto:suzy@goodvibe.com">suzy@goodvibe.com</a> is the address of the person or company intended to receive the message.</p><p><strong>Sun, Nov 18 2007 12:27:12 -0800 PST</strong></p><p>This particular transaction occurred on Sunday, November 18, 2007, at 12:27:12 Pacific Standard Time, and 8 hours behind the popular Greenwich Mean Time.</p><p><strong>Received: from alpha.tugood.com (alpha.tugood.com [122.210.4.10]) by mail.tugood.com (9.1.1) id 809h7y; Sun, Nov 18 2007 12:22:34 -0800 (PST)</strong></p><p>When you see this, you are being informed of which computer or machine sent the original message as well as the various stops along the way. The time of transmission, the IP address of the sender, the ID number of the message, and even the mail server program being used. There is a world of information in the e-mail headers.</p><p><strong>From: </strong><strong>ralphATtugood.com</strong><strong> (Ralph T. Good)</strong></p><p>The e-mail header gives the receiver's e-mail address as well as the given real name of Ralph T. Good.</p><p><strong>To: suzyATgoodvibe.com</strong></p><p>This is to whom the e-mail message was addressed.</p><p><blockquote><br>Note: One good method of telling if you are on a SPAM list, or being e-mailed inappropriately, is if you do not see your own e-mail address in this part of the header. Instead, you may see a long list of recipients, or an address that does not belong to you, or even, no header at all!</p><p></blockquote><br /><br>We have addressed the basics of an e-mail header. There are other components which may be added to an e-mail header such as "Errors-to", "Content-Type", and/or "BCC/CC". All of these headers are an intricate part of the whole e-mail message offering insights to who is sending the message, where the message has stopped, and who is the intended recipient.</p><p>When you receive the message, chances are good you will not see the full e-mail header. You will need to do a bit of research on how to read the e-mail header for your e-mail client.</p><p>For instance, if you are using the popular Microsoft Outlook, you would right click on the message while it is in your "inbox". Then, you would choose "Options" from the pop-up menu. Finally, investigate "Internet Headers" in the resulting dialog box.</p><p>Popular free e-mail clients such as Hotmail, G-mail, Yahoo Mail, and AOL Mail will have their out standards and instructions for looking at the entire e-mail header.</p><p>There are many IP address locators on the internet today. Simply typing in the IP address and tapping the "enter" button brings up information associated with the IP address. However, it must be stated that <strong>there are false IP addresses</strong> that may be coincidental or purposeful. Many spammers will utilize <strong>IP spoofing</strong> tools that will cloak the real IP address while placing in a false IP address.</p><p>Additionally, not all IP addresses are static, or remain the same. More and more IP addresses are dynamic, or constantly changing. Sometimes, this dynamic address changes continuously, and sometimes, this dynamic address will change at regular intervals such as once a week or once a month.</p><p>There are steps you can take to protect yourself from unwanted viruses or hacks to your computer. For instance, do not name your computer something obvious. Look at this example:</p><p>Received: from <strong>tomscompaq</strong> (22-122-31-23.abc.net [22.11.22.11]) by tugood.com (8.8.5) id TAA8997; Sun, 18 Nov 2004 18:44:22 -0600 (MDT)</p><p>The IP address of the computer is easy to see, but the real problem is the computer's name is right there! We can assume that the person's name is Tom and he is using a Compaq computer. This when coupled with the IP address is going to make it extremely easy for unscrupulous people to use this information to illegally enter the computer.</p><p><strong>Remember: Use a unique and different name for your computer!</strong></p><p>The IP address, as well as other information, found in the e-mail header of the next SPAM message you receive may just help you put a stop to the unwanted e-mail. You have the tools to put a stop to those unsolicited e-mails. Consider contacting the internet service provider, <a href="https://www.a1peoplesearch.com/Searches.aspx?search=reverse-email-search" rel="nofollow" target="_new">track down the original sender</a>, and protect your privacy and rights.</p><p>In addition, stay safe by being aware of the information you are sending with each e-mail message. As a test, send yourself an e-mail message, and investigate the information you are giving out with each innocent e-mail message you send.</p><p>Knowledge is power; stay empowered!</p> <br /> <br /> <br /> <br /> <br /> <br /><br /> <p>ABOUT THE AUTHOR: Patrick Baird is a Licensed Private Investigator and a recognized authority in the industry. He is co-founder of <a href="http://www.a1peoplesearch.com" target="_new">www.a1peoplesearch.com</a> which provides a wealth of informative articles and resources on everything you would need to know about the people search industry and public records retrieval.</p><p>If you are receiving unwanted emails and would like to learn more about who sent them we invite you to visit our Reverse Email Search.</p> <br />

Understanding, Translating, and Using Those E-mail Headers

Technology has made it possible for families to stay in touch with the simple click of a button, for best friends to exchange pictures of...

Continue Reading>>

How to Set Routers Using Gateway

<P>Select the router that is not capable of a wireless client bridge; this will be your gateway router.</P><P>Look on the back of your router for an IP address and enter this into your <a class="StrongLink" href="http://www.ehow.com/internet/">Internet</A> browser's address bar.</P><P>Type in your username and password, found on the back of your router or in the router's manual.</P><P>Change your router's IP to "192.168.1.1" in the LAN IP Setup section. Enable the "Use Router as DHCP Server" option.</P><P>Modify the IP address range so it starts at "192.168.1.100" to "192.168.1.199."</P><P>Click "Wireless Settings" and configure your router's security, choosing either "WPA" or "WPA2" to maximize performance. Write down the SSID, security type and security key.</P><P>Connect your modem to your router's WAN port.</P><P>Test your Internet connection using any mobile wireless device, such as an iPhone or laptop. Position this device where you wish to set up your wireless bridge. You should receive at least 50 percent signal strength.</P><P>Connect your second router --- capable of wireless client bridge --- directly to your <a class="StrongLink" href="http://www.ehow.com/computers/">computer</A> using an Ethernet cable.</P><P>Type "192.168.1.1" into the address bar of your browser. Look for "Domain Name Server" on the Router Status Page and write down the two sets of numbers next to it.</P><P>Log out of the router.</P><P>Go to "Start menu," then "Control Panel," followed by "Network and Internet Connections," then choose "Network Connections."</P><P>Right-click on your active Internet connection and then choose "Properties." Find and select "Internet Protocol" and then click "Properties."</P><P>Click on the "Use the following IP Address" radio button. Change the IP Address to "192.168.1.10," set the subnet mask to "255.255.255.0" and the Default Gateway to "192.168.0.1."</P><P>Enter the two numbers that you wrote down --- in the same order --- into the "Preferred DNS server" box and the "Alternative DNS Serer" box.</P><P>Log back into your router using the "192.168.1.1" IP address.</P><P>Click on "Wireless Basic Settings" and change the wireless mode to "Client Bridge." Set the Wireless Network Mode to "Mixed" and the Network Configuration to "Bridged."</P><P>Enter the SSID you note down into the box provided and then select "Apply Settings."</P><P>Click "Wireless Security." Enter the security type you noted down into the "Security Mode" box and then type in your security key.</P><P>Go to "Basic Setup" and change your router's IP Address to "192.168.1.3." Set the subnet mask to"255.255.255.0," the gateway to "192.168.1.1" and the Local DNS to "192.168.0.1."</P><P>Disable the WAN Connection Type and then click "Apply."</P><P>Log out of the router. Log back in using the new IP address "192.168.1.3." The second router should be connected to the gateway router.</P><P>Repeat the steps from this section for each router that you want to add to the bridge.</P>

How to Set Routers Using Gateway

Select the router that is not capable of a wireless client bridge; this will be your gateway router. Look on the back of your router for an...

Continue Reading>>

Simple Tricks For Using Skype and Looking Like a Pro

<br /> <p>One of the great things about technology is our ability to appear as put together and ready as any competitor with a great Internet and contact presence. After all can anyone really tell what your offices look like over the Internet or telephone? Unless you spend a ton of money and get great photos of your shop like my friends at TruSpeed Motorcars, there is no way for someone to know unless they show up. As long as you don't toss up picture of your cat sitting in the litter box and call it your business website, you are probably in good shape.</p><p>Recently I wrote an article about starting a business for less than a grand. That part is easy, it is the <br /><br>"doing" that is hard for most folks. A friend of mine read the article and followed it to the letter, thus beginning the creation of a new business for him. It was really cool to see first hand how someone interprets my thinking and how much I take for granted what people understand.</p><p>My friend called me to tell me about the adventure which showed me were I left some information out. I left out a couple of important steps in the section on how to use Voice over Internet Protocol or VoIP to look big on a small budget. My office is a hodge podge of Vonage and Skype. My hands down favorite is Skype. If you called right now, chances are I would take the call on my computer and talk to you over Skype. It doesn't matter if you call my cell number, my Vonage number or my Skype number. I have them all "ringing" or forwarded to my Skype account first, my cell second, and the Vonage phone third.</p><p>The handset phone in the office is used so infrequently that when my wife got locked out of our house by a real estate agent, she sat in my office for an hour waiting for someone. Her cell phone was inside the house, she didn't know the password to my computer and didn't even know there was still one plain old phone hidden next to our large color printer. She was 3 feet from freedom for an hour and didn't know it.</p><p>The only real feature all of these VoIP systems are all missing is a time scheduler. i.e. at 10 pm stop forwarding to my cell, go directly to voice-mail. I do miss that part of the phone system we used when I was still paying crazy rent for office and retail space.</p><p>Within Skype there are a couple of options that I can't recommend strong enough. First, get a local number for every area code you do business in. This is clearly ancient marketing and for some reason still works. No one calls our toll free numbers anymore and area codes are becoming a thing of the past for cell users. In the office, the old school phone systems still care.</p><p>The next must use feature is on your account page, it is caller id. No one wants to answer a call from 100012345 on their cell phone, can you blame them? Every telemarketing hack shows up that way. Separate yourself from this crowd of telemarketing hacks and look like you are ready to do business. If you are a Skype user you can do this now under the Skype menu, then select account. If you bought an on line number, you can use that for your caller id. It used to be that you could also use your mobile number if you connected the accounts, you can't anymore, at least not the business accounts. The caller id isn't always displayed, but it is worth it for the 80% or so times it does.</p><p>Finally if you want to go all out, get a great sounding microphone. I use the Blue snowball and everyone says it sounds great. Music stores have the best selection of USB microphones for reducing echo or sitting on a desk. At $199 the Blue Snowball looks cool too. Another option is to use a high quality blu-tooth headset like the Plantronics Pro or 521. I have six different blu-tooth headsets and these two are what I use when I travel with my laptop. It is really cool to jump on a WiFi hot spot and be able to run my business and work with customers just about anywhere. I like my office, but I like the bench in front of Starbucks on Balboa Island a whole lot better.</p> <br /> <br /> <br /> <br /> <br /> <br /><br /> <p>For More information on getting your life and business tracking to the top, visit Scott's website, <a href="http://www.sonowwhatscott.com" target="_new">http://www.sonowwhatscott.com</a> or his business at <a href="http://www.rusticcreek.com" target="_new">http://www.rusticcreek.com</a></p> <br />

Simple Tricks For Using Skype and Looking Like a Pro

One of the great things about technology is our ability to appear as put together and ready as any competitor with a great Internet and c...

Continue Reading>>

FBI Using Criminal Hacking Techniques on Citizens

<br /> <p>The US National Security Agency is probably the most sophisticated group of security hackers in the world. Many will argue this point. The fact is, without NSA, US STRATCOM, which directs the operation and defense of the military's Global Information Grid, and US CERT, attacks on our critical infrastructures would be successful. We'd be  living in the dark, telephones wouldn't work, food wouldn't be delivered to your supermarket and your toilet wouldn't flush. These are not the same bumbling government employees you see on C-SPAN. The Obama administration is in the process of completing an internal cyber-security review,  announcing plans for cyber-security initiatives and determining who's going to lead the charge. The New York Times reports that the NSA wants the job and of course, this is raising hackles amongst privacy advocates and civil libertarians who fear that the spy agency already has too much power.</p><p>I'm all for checks and balances. However, in order to detect threats against our nation and other global computer infrastructures from criminal hackers and terrorists, those in charge of cyber-security must have full and unlimited access to networks. There is certainly a legitimate concern here that any government agency with too much power can overstep citizens' rights. However, coming from a security perspective, there are some very bad guys out there who would like nothing more for you to be dead. Here's a glowing example of how this power is used for good. Wired.com's Kevin Poulsen (who should be required reading) reports on an FBI-developed super spyware program called "computer and Internet protocol address verifier," or CIPAV, which has been used to investigate extortion plots, terrorist threats and hacker attacks in cases stretching back to before the dotcom bust.</p><p>This is James Bond, Hollywood blockbuster technology that makes for a gripping storyline. The CIPAV's capabilities indicate that it gathers and reports a computer's IP address, MAC address, open ports, a list of running program, the operating system type, version and serial number, preferred Internet browser and version, the computer's registered owner and registered company name, the current logged-in user name and the last-visited URL. That's the equivalent of a crime scene investigator having fresh samples of blood for the victim and perpetrator, and 360 degree crystal clear video of the crime committed. The FBI sneaks the CIPAV onto a target's machine like any criminal hacker would, using known web browser vulnerabilities.</p><p>They use the same type of hacker psychology phishers use, tricking their target into clicking a link, downloading and installing the spyware. They function like any illegal hacker would, except legally. In one case, they hacked a mark's MySpace page and posted a link in the subject's private chat room, getting him to click it. In another case, the FBI was trying to track a sexual predator that had been threatening the life of a teenage girl who he'd met for sex. The man's IP addresses were anonymous from all over the world, which made it impossible to track him down. Getting the target to install the CIPAV made it possible to find this animal. Numerous other cases are cited in the Wired.com article, including an undercover agent working a case described as a "weapon of mass destruction" (bomb & anthrax) threat, who communicated with a suspect via Hotmail, and sought approval from Washington to use a CIPAV to locate the subject's computer.</p><p>So while Big Brother may yield some scary power, criminals and terrorists are a tad scarier. I've always viewed the term "Big Brother" as someone who watches over and protects you. Just my take. </p> <br /> <br /> <br /> <br /> <br /> <br /><br /> <p>Robert Siciliano <a href="http://IDTheftSecurity.com" rel="nofollow" target="_new">http://IDTheftSecurity.com</a></p> <br />

FBI Using Criminal Hacking Techniques on Citizens

The US National Security Agency is probably the most sophisticated group of security hackers in the world. Many will argue this point. Th...

Continue Reading>>

How to Restore Using a Recovery Disk

<P>Click "Start," and then Control Panel. Click "System and Security" then "Backup and Restore." On the left side of the screen click "Create a System Recovery Disk."</P><P>Insert a blank CD or DVD into your computer's CD/DVD writer and click "Create Disc."</P><P>Click "Close" to finish creating the Windows 7 recovery disc.</P><P>Restart your computer with the Windows 7 recovery disc inserted and press any key when prompted.</P><P>Select your language when prompted and click "Next" to open a list of recovery options.</P><P>Click on the option labeled "System Restore."</P><P>Click "Next" and select a restore point on the screen that appears. Each system restore point will have a short description to help you decide what the outcome of the system restore will be.</P><P>Click "Next" again and then click "Finish" to begin restoring your computer to an earlier time. After restoring, your computer will boot normally.</P><br /><p><a href="http://www.ehow.com/how_7432015_restore-using-recovery-disk.html" rel="nofollow" target="_blank">View the original article here</a></p>

How to Restore Using a Recovery Disk

Click "Start," and then Control Panel. Click "System and Security" then "Backup and Restore." On the left sid...

Continue Reading>>