HP 29 Refill Instructions

<P><a cartridge="" ink="" title="#jsArticleIntroImageCredit rel=thinbox><IMG title="></A></P><br /><P>Ink Cartridge Headcartouche d'encre image by lefebvre_jonathan from <A" href="http://www.fotolia.com/">Fotolia.com</A> Ink cartridges for printers are not cheap. An alternative to buying new ink cartridges is available: ink refill kits. One refill kit cost around the same amount as one ink cartridge but can refill a single HP 29 cartridge two to four times.</P><br /><P></P>SuppliesAfter buying an ink refill kit, get scotch tape, paper towels, and a ballpoint pen.PrepRemove the ink cartridge from your printer and tape the bottom head of the cartridge to prevent possible leaking. On the top corner hole is a ball that you'll need to push down with either a ballpoint pen or the needle provided by the refill kit.Inject InkWith the cartridge in the upright position inject 20 ml of ink in the top corner hole with the syringe. Gently squeeze the cartridge and tape the hole to create an airtight seal. Remove the tape from the bottom of the cartridge and wipe off any excess ink.Final StepPut the cartridge back in your printer and run one to three cleaning cycles to get the ink running to the head. References <a href="http://www.refill4.com/refillinstructons/cartridges/hp-26-29-33-20.htm" rel="nofollow" target="_blank">Refill 4</A> <a href="http://www.tonerrefillkits.com/its_empty_not_broken.php" rel="nofollow" target="_blank">TonerRefillKits: It's Empty, Not Broken</A> Resources<a href="http://www.pacificink.com/downloads/FHP-29.pdf" rel="nofollow" target="_blank">Pacific Ink</A>

HP 29 Refill Instructions

Ink Cartridge Headcartouche d'encre image by lefebvre_jonathan from Fotolia.com Ink cartridges for printers are not cheap. An alternati...

Continue Reading>>

Epson Stylus R200 Refill Ink Instructions

<P>Lay down a couple paper towels over your intended work surface.</P><P>Remove the empty ink cartridge from the Epson Stylus and insert it into the top of the chip resetter.</P><P>Wait for the LED lights to flash green, then remove the cartridge and place it on the paper towels.</P><P>Use the thumb drill from the refill kit to create a hole on top of the empty cartridge.</P><P>Puncture a second hole into the cartridge so that air can escape when you begin to pump ink in.</P><P>Fill the syringe from the refill kit with the appropriate ink.</P><P>Place the syringe needle into the fill hole and fill the cartridge completely.</P><P>Remove the syringe and cover the two holes with either electrical tape or small dabs of hot glue to create a tight seal.</P><P>Wait for 24 hours before attempting to replace the cartridge as the ink needs time to settle.</P>

Epson Stylus R200 Refill Ink Instructions

Lay down a couple paper towels over your intended work surface. Remove the empty ink cartridge from the Epson Stylus and insert it into the...

Continue Reading>>